Hardtop Finished and fitted

Today I did the last bits of trimming gluing the last few pieces of vinyl down.

Then I rivited on the quaterlights and fitted the rubber seals.

Next it was time to fit the reas screen, after a few starter attempts I eventually figured out the best way using some cord to ease the rubber over the lip.

Now it is ready to have its plastic chrome finisher fitted

I warmed it up in hot water to make it more pliable.

All done

All the remains now is to open up the holes on the rear deck and place it on the car.
With the car jacked up on both sides and some gentle persuasion of the windscreen frame with my foot it is at last fully attached.